tablo13
Sep 20, 05:25 PM
Ok guys, I'm torn between two cases. First of all, I just got a case from Amazon, the MiniSuit, and I hate it! )= This was my first case for my first iPod Touch, and I was very disappointed. It is silicone/rubbery, but it is like a magnet for lint, hair, dust, and anything else I don't want to go on it. I put it in my pocket (my pockets are relatively clean, nothing too out of the ordinary) and when I pulled it out, it was just covered in lint. I tried to brush it off, but it won't 'brush off' because the rubber is too sticky. Also, the case is not snug at all, and the sides are always slipping off. Not happy. I am returning the case.
http://www.amazon.com/gp/product/B0041PIGMY/ref=oss_product
So now, after scouring these forums, I have seen two cases that I think I will like a lot, but I am not sure which I should get. I am hoping some of you will have some personal experience and can help me out!
The first is the dermaSHOT (http://www.myincipio.com/product/IPOD_TOUCH_IP-900/iPod-touch-4G-dermaSHOT-Silicone-Case---Black.html). I am worried, however, that I will have the same problem with lint-magnet, because it is also made of silicone. Any ideas there?
The other is one of the Melkco Leather Cases (http://www.carrymobile.com/scripts/main/viewitem-A1ITO4LCFT1BK-ITO4.html). Back when I had my first iPod (it was the iPod 3g or 4g, the first to play videos) I had a case very similar and I loved it! Does anyone have any reviews/tips on this case?
Anywho, any help would be very much appreciated! Thanks!
Does anti-static have anything to do with it not being a lint magnet?
http://www.amazon.com/gp/product/B0041PIGMY/ref=oss_product
So now, after scouring these forums, I have seen two cases that I think I will like a lot, but I am not sure which I should get. I am hoping some of you will have some personal experience and can help me out!
The first is the dermaSHOT (http://www.myincipio.com/product/IPOD_TOUCH_IP-900/iPod-touch-4G-dermaSHOT-Silicone-Case---Black.html). I am worried, however, that I will have the same problem with lint-magnet, because it is also made of silicone. Any ideas there?
The other is one of the Melkco Leather Cases (http://www.carrymobile.com/scripts/main/viewitem-A1ITO4LCFT1BK-ITO4.html). Back when I had my first iPod (it was the iPod 3g or 4g, the first to play videos) I had a case very similar and I loved it! Does anyone have any reviews/tips on this case?
Anywho, any help would be very much appreciated! Thanks!
Does anti-static have anything to do with it not being a lint magnet?
dawnraid
Mar 22, 11:28 PM
Bought a black one last week (my old 4th gen died R.I.P). It just made sense, as I have 145gb of tunes that all get regularly rinsed! Works pretty well with my senheisser hd-25'1-I's
I dont know why I would spend more on a touch and get half the space.
EZ you lot :D
I dont know why I would spend more on a touch and get half the space.
EZ you lot :D
iJimmy
Jan 30, 08:49 AM
My contribution
https://www.me.com/ro/jimmy.nguyen/Galleries/100033/IMG_0706/web.jpg?ver=12955761350001
https://www.me.com/ro/jimmy.nguyen/Galleries/100033/IMG_0706/web.jpg?ver=12955761350001
ffakr
Nov 29, 11:28 PM
http://news.com.com/Intel+completes+design+of+Penryn+chip/2100-1006_3-6139487.html
But, since Intel has stated that two dual-core dies in a package is the right way to do quad-core at 65nm, which implies that 45 nm is the right way to do quad-core per die, and two quad-cord dies in a package at 45 nm is the right way to do octo-core at 45nm - obviously we'll have a PowerBook G5 next Tuesday.
Whatever. Apple's pushed Universal apps because they are totally ready to die shrink IBM plants to .65nm and that can only mean one thing.. Power5 POWERBooks. Yes, that's "POWERBooks" not "PowerBooks".
BooYaa.
It's the master plan.. we move to a new architecture every 18 months. Apple's totally working on their own MIPS chip since the ISA went open a while back. The Developer copies of XCode now cross compile for 5 architectures but I'd have to kill you if I listed all the Instruction sets currently supported. The new build of Stuffit Expander 11 UNIVERSAL is now 427 MB. ROCK ON Obese-Binaries.
:eek:
But, since Intel has stated that two dual-core dies in a package is the right way to do quad-core at 65nm, which implies that 45 nm is the right way to do quad-core per die, and two quad-cord dies in a package at 45 nm is the right way to do octo-core at 45nm - obviously we'll have a PowerBook G5 next Tuesday.
Whatever. Apple's pushed Universal apps because they are totally ready to die shrink IBM plants to .65nm and that can only mean one thing.. Power5 POWERBooks. Yes, that's "POWERBooks" not "PowerBooks".
BooYaa.
It's the master plan.. we move to a new architecture every 18 months. Apple's totally working on their own MIPS chip since the ISA went open a while back. The Developer copies of XCode now cross compile for 5 architectures but I'd have to kill you if I listed all the Instruction sets currently supported. The new build of Stuffit Expander 11 UNIVERSAL is now 427 MB. ROCK ON Obese-Binaries.
:eek:
balamw
Sep 7, 12:01 AM
It seems to me that the distribution of 480i content is pretty much settled. Netflix and Blockbuster do this well and at very competitive prices. I can't see that Apple would benefit much from trying to compete there.
I agree with you, except for the fact that Netflix already carries both BluRay and
HD-DVD formats, so Apple would be directly competing with them in HD videos.
My 2 720p HDTVs are salivating at the possibilities...
B
I agree with you, except for the fact that Netflix already carries both BluRay and
HD-DVD formats, so Apple would be directly competing with them in HD videos.
My 2 720p HDTVs are salivating at the possibilities...
B
JRM PowerPod
Aug 7, 04:43 AM
You have a point, but it's already 7:40 pm on Monday here so your work day would already be done. Plus I'm in Australia so how much can I really complain?
On a side note:
Maybe some Aussies can help me understand the price difference of computers here. Back home I bought the 17" MacBook Pro for something like $3,300 AUD and I come over here and it's in the $4,500 AUD range. I did get the student discount back home, but that's a huge margin.
Tell me about it, the 15" 2.16Ghz is $3518 edu, its not as bad as it use to be
On a side note:
Maybe some Aussies can help me understand the price difference of computers here. Back home I bought the 17" MacBook Pro for something like $3,300 AUD and I come over here and it's in the $4,500 AUD range. I did get the student discount back home, but that's a huge margin.
Tell me about it, the 15" 2.16Ghz is $3518 edu, its not as bad as it use to be
Doraemon
Mar 28, 09:56 AM
Its killing them
Geez. How many more people do you need to see that you're wrong. :rolleyes:
Geez. How many more people do you need to see that you're wrong. :rolleyes:
jsm4182
Feb 26, 01:03 PM
I don't think that's a first-gen, mate. The first gens were acrylic:
The acrylic ones are the Apple Studio Displays. They've been the Cinema display since they moved to aluminum.
The acrylic ones are the Apple Studio Displays. They've been the Cinema display since they moved to aluminum.
Chris Bangle
Sep 5, 03:13 AM
2pm GMT
absurdio
Oct 24, 05:46 AM
I'd love to see a new design, but I'll be happy with:
1. C2D 2.33GHz
2. bigger HD, with easy-swap HD bay
3. heat problems, "mooing," and random-shutdowns solved
Anything else will be icing on the cake!
:)
iBorg
Completely right. As everyone else has speculated, it seems likely that the big overhaul will be early next year. That said, if this revision has the upgrades you mentioned, I'll be elated. I'd much rather have a functional (i.e. not overheating, mooing, and whining) machine than a feature-crammed but functionally useless one. Stability, in this case, is probably more important than unworkable new features.
1. C2D 2.33GHz
2. bigger HD, with easy-swap HD bay
3. heat problems, "mooing," and random-shutdowns solved
Anything else will be icing on the cake!
:)
iBorg
Completely right. As everyone else has speculated, it seems likely that the big overhaul will be early next year. That said, if this revision has the upgrades you mentioned, I'll be elated. I'd much rather have a functional (i.e. not overheating, mooing, and whining) machine than a feature-crammed but functionally useless one. Stability, in this case, is probably more important than unworkable new features.
Trauma1
Apr 21, 11:24 AM
The people who are truly concerned about their privacy, for whatever reason that may be, know that this issue pales in comparison to everything else.
paulyras
Jan 11, 10:36 PM
I don't know if anyone has said this yet, but after looking at http://www.ecoupled.com/
I can't help but think that Apple could come up with a user-friendly way of implementing this sort of technology. I personally think its only a matter of time before ALL chords are "cut". You set your iPod on your desk, it charges through inductive currents, your headphones do the same and communicate with your iPod through bluetooth (or some other wireless medium)...etc. And your computer, also, has no wires. Electricity is passed to it in the same sort of way. Now, wouldn't that be cool :)
"There's something in the air"
Maybe its just wishful thinking ;)
[Note: After being a long time READER of Mac Rumors, I have officially made my first post.]
Dude, my toothbrush does that. Seriously. It's the sonicare advanced. It's nice. I wholeheartedly endorse that except for one problem...
Electromagnetic fields decrease with the cube of the distance (I think- might be square, but someone smarter than I can correct me). You would need to keep the charger within a few inches while charging. Frankly, if I'm going to carry a charger with me when I travel, I really don't care if it's plugged in directly or just has to be really close.
If, by chance the field is strong enough to work from any significant distance, you couldn't convince me to keep it anywhere near my lap. There are some irreplacable goods down there (and I aint talking about a laptop).
I can't help but think that Apple could come up with a user-friendly way of implementing this sort of technology. I personally think its only a matter of time before ALL chords are "cut". You set your iPod on your desk, it charges through inductive currents, your headphones do the same and communicate with your iPod through bluetooth (or some other wireless medium)...etc. And your computer, also, has no wires. Electricity is passed to it in the same sort of way. Now, wouldn't that be cool :)
"There's something in the air"
Maybe its just wishful thinking ;)
[Note: After being a long time READER of Mac Rumors, I have officially made my first post.]
Dude, my toothbrush does that. Seriously. It's the sonicare advanced. It's nice. I wholeheartedly endorse that except for one problem...
Electromagnetic fields decrease with the cube of the distance (I think- might be square, but someone smarter than I can correct me). You would need to keep the charger within a few inches while charging. Frankly, if I'm going to carry a charger with me when I travel, I really don't care if it's plugged in directly or just has to be really close.
If, by chance the field is strong enough to work from any significant distance, you couldn't convince me to keep it anywhere near my lap. There are some irreplacable goods down there (and I aint talking about a laptop).
twoodcc
May 1, 07:42 PM
one 08 MP 2.8 dual quad
two 09 MP 2.26 dual quads
I finally got inCrease to push my key to F@H, although it looks like one (one of the newer PMs) isn't getting the bonus... I'll have to check when I get back.
I could never get the Console one to work right....
I just saw that my user name is/was being listed multiple times, I wonder if that has anything to do with it (I thought I wasn't getting any points from the console)
????
dang, 3 mac pros!
are you running bigadv units on all 3? or do you use them for something other folding? (i assume you do) and if you don't mind me asking, how do they do if you use them while folding?
well it seems something might be going on with your username for some reason. you might want to make a thread over at the folding forums about it - maybe they can help
two 09 MP 2.26 dual quads
I finally got inCrease to push my key to F@H, although it looks like one (one of the newer PMs) isn't getting the bonus... I'll have to check when I get back.
I could never get the Console one to work right....
I just saw that my user name is/was being listed multiple times, I wonder if that has anything to do with it (I thought I wasn't getting any points from the console)
????
dang, 3 mac pros!
are you running bigadv units on all 3? or do you use them for something other folding? (i assume you do) and if you don't mind me asking, how do they do if you use them while folding?
well it seems something might be going on with your username for some reason. you might want to make a thread over at the folding forums about it - maybe they can help
reel2reel
Apr 12, 10:01 PM
Jeez, I can't even get photography bay to load anymore and Rob Imbs' photos are getting 700 views in a matter of minutes. :eek:
Dont Hurt Me
Mar 19, 03:39 PM
well for just once I would like the fastest single cpu in one of the consumer models and give it a good video card. thats all not asking for the world.
whatsleep
Jan 4, 12:12 PM
Here are the things I expect to happen:
Love
New zealand landscape
Hd Wallpaper 1600.
twoodcc
May 3, 03:45 PM
They are fine on my 07 8 cores Mac Pro. Even light encoding is fine...
I also have the terminal going with 6 tabs, each running folding on another machine. I worried about iTunes because I had heard that it took quite a bit of cpu, but not for me it doesn't seem to have any effect on folding.
interesting. well i might get a mac pro someday. my homebuilt machine is a big hassle and i'm not there to work on it. i would rather have a computer that i can fold and use regularly
I also have the terminal going with 6 tabs, each running folding on another machine. I worried about iTunes because I had heard that it took quite a bit of cpu, but not for me it doesn't seem to have any effect on folding.
interesting. well i might get a mac pro someday. my homebuilt machine is a big hassle and i'm not there to work on it. i would rather have a computer that i can fold and use regularly
Z-Bro
Mar 23, 03:08 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8F190 Safari/6533.18.5)
I lost my 160gb and I've been waiting for a classic update to buy. There's no chance I'll buy until it updates with a 220 drive so I can put all my videos and music. Let's go Apple!!
I lost my 160gb and I've been waiting for a classic update to buy. There's no chance I'll buy until it updates with a 220 drive so I can put all my videos and music. Let's go Apple!!
peakchua
Jun 23, 10:12 AM
i hope that apple will not implement touch screen **** due to other companies pressure. i would make 2 series. imac touch which has ok specs and a touch screen and imac pro which is HIGH SPECS, BEAUTIFUL DISPLAY, and cheaper. personally, i would like touch to be INTEGRATED not with ibitchos layer. (sorry kinda pissed apple is all IPHONE!!) if a touchscreen must be used, do not implement ios since its such a smartphone based os.
BabyFaceMagee
Jan 12, 12:31 AM
Here is some info on the wireless power adaptor technlogy I mentioned previously that I believe will be incorporated into a new low power mac that does not ever need to be plugged in. There are two trains of thought. One is that it will be set atop a wireless power pad that will conduct the electricity a mere inch or two to 'charge' or power the mac without any cable or outside connectors and the other which has been demonstrated by a few other companies including involves electricity being sent through the air similar to a wireless signal, except the laptop actually charges without any wires at all - cordless electricity as it were.
Here's some links to some past posts discussing the technlogy.
http://www.tuaw.com/2007/02/16/rumors-docking-and-charging-by-induction/
http://www.louisgray.com/live/2007/02/its-time-to-make-power-wireless-and.html
Finally, a company called Powercast at www.powercastco.com demonstrated this wireless power transfer not too long ago by lighting a bulb up with absolutely no wires. Pretty cool and inevitable if you ask me.
This is what I'm guessing will be the hot new product - the MacAir - no cords. Power without wires.
BFM
Here's some links to some past posts discussing the technlogy.
http://www.tuaw.com/2007/02/16/rumors-docking-and-charging-by-induction/
http://www.louisgray.com/live/2007/02/its-time-to-make-power-wireless-and.html
Finally, a company called Powercast at www.powercastco.com demonstrated this wireless power transfer not too long ago by lighting a bulb up with absolutely no wires. Pretty cool and inevitable if you ask me.
This is what I'm guessing will be the hot new product - the MacAir - no cords. Power without wires.
BFM
guzhogi
Nov 15, 10:16 AM
Applications should be, and most likely are written to take advantage of available resources. A developer should be writing applications to take advantage of 8-cores already, they don't need an 8-core machine to do so.
I agree. I wonder how idle the graphics card is when not using games. It would really help if more programmers were able to write programs that take advantage of the graphics card and audio card. Too bad SoundBlaster cards are Windows only. I wonder how much faster ripping CDs and converting to different audio formats in iTunes would be if the instructions got offloaded to a Soundblaster or other sound card.
I also heard of a company called Aspex Semiconductors (www.aspex-semi.com) that designs PCI cards that speed up video processing and has something like OpenGL, but called OpenRL for video processing.. Would be cool if Aspex & Apple teamed up to make a card for Mac Pros to speed up Final Cut Pro & iMovie. Just my 2 cents.
I agree. I wonder how idle the graphics card is when not using games. It would really help if more programmers were able to write programs that take advantage of the graphics card and audio card. Too bad SoundBlaster cards are Windows only. I wonder how much faster ripping CDs and converting to different audio formats in iTunes would be if the instructions got offloaded to a Soundblaster or other sound card.
I also heard of a company called Aspex Semiconductors (www.aspex-semi.com) that designs PCI cards that speed up video processing and has something like OpenGL, but called OpenRL for video processing.. Would be cool if Aspex & Apple teamed up to make a card for Mac Pros to speed up Final Cut Pro & iMovie. Just my 2 cents.
coolfactor
Apr 2, 07:19 PM
This ad campaign is trying to do what Think Different (http://www.youtube.com/watch?v=4oAB83Z1ydE) did. Let's see how good it gets, but nothing will top the Think Different campaign. Nothing.
roland.g
Apr 19, 11:05 AM
I've been waiting for a refresh to replace my rev. A Aluminum 24" iMac 2.8Ghz (Aug 2007) with a new 27". Going to sell my Aluminum 13.3" MacBook and iMac and get a new one.
But I will probably wait the extra few months for Lion. No point in upgrading just prior to what I expect to be a relatively major OS release. I doubt 10.7 will be the $29 upgrade Snow Leopard was.
But I will probably wait the extra few months for Lion. No point in upgrading just prior to what I expect to be a relatively major OS release. I doubt 10.7 will be the $29 upgrade Snow Leopard was.
Chaos123x
Apr 12, 10:02 PM
$299 are you out of your mind?